User Guide

Setting a system
password
Result
Clearing a system
password
19 Maintenance - Speed Touch Password
230 / 288
3EC 36231 ABAA TCZZA Ed. 01
Proceed as follows:
1. Click
on the STPro pages (See section 21.2 for
more information).
2. On the 'System setup' page the following table is shown:
The 'System setup' table allows you to configure a system
password.
3. In the 'Password' field, fill in a password. Retype your
password in the 'Retype your password' field.
Note: Asterisks will appear instead of the password. The number of
asterisks is at random.
4. Click .
5. To make your password permanent, click
.
6. Authenticate yourself, using the system password, you just
configured.
Every time you want to access the STPro pages or (Telnet) CLI you
must authenticate yourself, using the system password.
To clear the STPro system password you must clear both the
'Password' field and 'Retype your password' field, i.e. delete all
asterisks. Click
and to store your changes.
No authentication is required anymore to access the STPro pages,
or the (Telnet) CLI.