User Guide

Activating software
Result
18 Maintenance - Speed Touch Software
226 / 288
3EC 36231 ABAA TCZZA Ed. 01
Proceed as follows to switch passive upgrade and active running
software versions:
1. If needed, browse to the 'Upgrade' page.
Note: Make sure a passive software version is labeled in the 'Passive
software version' field. If not, firstly upload a upgrade software package as
described in the previous procedure.
2. Click to start the switching of the two versions.
After switching the versions, the STPro reboots:
After reboot your STPro will come online with the upgrade version
(active and passive software are switched):