User Guide

The 'NAT Settings'
table
'NAT Settings' table
components
16 Network Security - NAT & PAT
202 / 288
3EC 36231 ABAA TCZZA Ed. 01
The following figure shows the 'NAT Settings' table:
Field Description
Nr Indicates an index number for the static NAT entry..
Type Indicates the template used for the NAT entry.
In case dynamic addresses are used to connect to the WAN
side, e.g. for PPP connections where the STPro receives a
different IP address each time the connection is established,
the STPro allows to save the NAT settings in a template. That
way you don't have to specify which of the STPro's IP
addresses to use.
Inside IP
Inside port
Inside address
Indicates the IP address and port of the local PC to which
traffic is to be redirected.
The 'Inside address' field indicates both IP address and port
as IP:PORT.
Note: The inside port must only be specified for the TCP and
UDP protocols. All other protocols do not need a port to be
specified.