User Guide

Configuring the DNS

server

Adding DNS leases

manuall

Resetting the DNS

server

15 Networking Services - DNS

192 / 288

3EC 36231 ABAA TCZZA Ed. 01

Check the 'Server active' checkbox to enable the STPro DNS

server.

In the 'Domain name' field you can enter the domain name of

your LAN. This name is communicated by the DNS server to the

local PCs, and is subsequently used by the PCs to complete a DNS

request.

The 'DNS hostname' table allows you to configure DNS leases

manually, e.g. for devices which do not support DNS.

Proceed as follows:

1. In this table if needed, click

2. Enter the following information in the 'DNS hostname' table:

 The DNS hostname for the device

 The IP address of the device.

3. Click

and to finish the procedure.

To reset the STPro DNS server and clear all current DNS host

entries, proceed as follows:

1. Browse to the 'DNS' page.

2. If you are sure to reset the STPro DNS server, click

the 'DNS server Configuration' table.

3. The STPro will ask to confirm the reset:

4. Click if you are sure. Otherwise click .

5. Click

to make the reset permanent.

6. Press the reload button of your Web browser.