User Guide

Service Offering
Default STPro VPI/VCI
settings
1 Speed Touch Quick Guide
19 / 288
3EC 36231 ABAA TCZZA Ed. 01
1.2.3 Check your Service Provider's Offering
The SP provides at least the following information:
 The VPI/VCI of the Virtual Channel (VC) to use on the DSL
line
 The Connection Service supported on this VC
 The Encapsulation Method (if different from the Connection
Service's default encapsulation).
Example:
 VPI/VCI = 0/35
 Connection Service = ETHoA (RFC1483/Br)
 Encapsulation Method : ETHoA default, i.e. LLC/SNAP
Your STPro supports multiple simultaneous VCs on the DSL line. If
your SP exploits this capability, he will provide this information per
VC.
The VPI/VCI value of the default configured VCs are listed in
Appendix C.
In the event that the provided VPI/VCI differ with the STPro
defaults, you can change VC settings via the STPro pages.
See section 13.3 for more information.