User Guide

Introduction
In this subsection
General ATM/DSL
endtoend IP
architecture
14 Networking Services - IP
183 / 288
3EC 36231 ABAA TCZZA Ed. 01
14.5.2 Configuring the STPro IP Routing Table
The main function of the IP router in the STPro, is to route IP
packets from the local network to the remote networks over
the ATM/DSL connections and vice versa.
In this subsection, configuration of the STPro IP routing table is
described.
 General ATM/DSL EndtoEnd IP Architecture
 ATM/DSL IP Routing
 STPro Poweron IP Routing Table Configuration
 'IP Route' Table
 'IP Route' Table Components
 Adding Routes to the 'IP Route' Table
 Criteria for a Route to be Valid.
The figure below provides an overview of the general endtoend
IP architecture:
Internet
20.0.0.1
ISP
10.0.0.1
10.0.0.10
30.0.0.1
30.0.0.3
30.0.0.2
10.0.0.2
STPro
Corporate
ATM
Network