User Guide
Enabling an STPro
DHCP client
The STPro as DHCP
client
14 Networking Services - IP
178 / 288
3EC 36231 ABAA TCZZA Ed. 01
Proceed as follows:
1. If needed, click
on the 'DHCP' page.
2. In this table if needed, click
.
3. Select the interface you want to enable DHCP for from the
'Interface' popdown list:
Select eth0 in case you want to enable the DHCP client
for the STPro itself
Select the Routed Ethernet entry in case you want to
enable the MER DHCP client.
4. Optionally enter one or more of the following fields:
'IP address'
'Client ID'
'Host name'
'Lease time'.
5. Click
. As a result the DHCP client is enabled.
6. Click
to store the applied lease to permanent
storage.
IP Address
Internet
Access Point
ATM
Network
DHCP Client
IP Address
DHCP Server
STPro