User Guide
In this subsection
'DHCP Server Startup
Mode' table
Configuring the STPro
for a LAN without
DHCP
14 Networking Services - IP
171 / 288
3EC 36231 ABAA TCZZA Ed. 01
14.4.2 The STPro DHCP Server
The 'DHCP Server Startup Mode' Table
Configuring the STPro for LANs without DHCP Server
Configuring the STPro as DHCP Server
Configuring the STPro for Auto DHCP
The STPro as DHCP client
'DHCP Server Configuration' Table
Address Pool Configuration
PPP Spoofing Configuration
'DHCP Server Lease' Table
Adding Leases Manually.
On the STPro 'DHCP Server' page the 'DHCP Server Startup
Mode' table allows to configure the STPro DHCP server behavior:
To setup the STPro without DHCP, tick .
In this configuration it is assumed that all members, the STPro
included, have static IP addresses.
See subsection 14.3.2 for static IP addressing of the STPro.
Note: This configuration might be required in case you use the Transparent
Bridging packet service.