User Guide
'IP address' table
components
14 Networking Services - IP
165 / 288
3EC 36231 ABAA TCZZA Ed. 01
Field Description
Intf Indicates the interface (Intf) to which the IP parameter set was
assigned to.
It can take several values depending on the packet services
that are active. Among others the Ethernet (eth0) and the
Loopback (loop) are always present.
Address Indicates the IP address of the interface.
Netmask Indicates the netmask of the interface.
Type Indicates the origin of the IP parameters.
It can take following values:
Value Description
Auto
User Implies that an additional IP parameter set
was added through the 'Initial Setup' page.
Extra
Implies that an additional IP parameter set
was added through the 'Routing' page. The
default IP address 10.0.0.138 is also of this
type.
Tem p Implies that this (additional) IP parameter
set was added via a PingofLife.
Implies that the parameters were acquired
automatically through DHCP, or are typical
standard IP addresses (e.g. 'loop').
Transl Indicates the translation performed.
It can take following values:
Value Description
None
PAT NA(P)T can be (or is) performed on this
address.
No address translation can be performed
on this address.