User Guide

Assigning IP addresses
to the STPro
STPro and multiple IP
addresses
'IP address' table
14 Networking Services - IP
164 / 288
3EC 36231 ABAA TCZZA Ed. 01
14.3.1 STPro IP Address Types
IP addresses can be assigned to the STPro in several ways.
Summarized, following IP address types exist:
 The default IP address: 10.0.0.138
 IP addresses assigned via the 'Initial Setup' page
 IP addresses assigned via a 'PingofLife
 IP addresses assigned via the 'Routing' page
 IP addresses assigned via the 'DHCP Client' page
 IP addresses configured and/or negotiated by connections.
As the STPro IP layer supports logical multihoming (one interface
supporting multiple IP addresses), both statically and dynamically
configured IP address(es) can be active at the same time.
On the STPro 'Routing' page the 'IP address' table summarizes all
IP addresses configured on any of the STPro interfaces: