User Guide

DSL service
Ethernet port(s)
Accessing the STPro
1 Speed Touch Quick Guide
16 / 288
3EC 36231 ABAA TCZZA Ed. 01
1.2.1 What you Need
Depending on the STPro variant you purchased, the following DSL
service must be available at your local premisses:
 ADSL service must be enabled on your telephone line.
As both telephone and ADSL service are simultaneously
available from the same copper pair, you need a central
splitter or distributed filters for decoupling ADSL and
telephone signals.
 SHDSL service must be enabled on a dedicated singlepair
copper line.
Contact your SP for more information.
To use the Ethernet port(s) you need at least:
 One PC with an Ethernet 10BaseT PCNetwork Interface
Card (NIC) installed
 For local networking, a 10BaseT hub (if needed) and the
necessary connection cables.
To use the (optional) ATMF25.6 port you need:
 A PC with an ATMF25.6 PCNIC installed
 For ATM networking, a workgroup ATM switch.
For local configuration via HTTP/HTML, you need:
 A TCP/IP protocol suite
 A Web browser.
For native Command Line Interface (CLI) access you need:
 A serial cable
 An ASCII terminal (VT100) or a PC with ASCII terminal
emulation.