User Guide

The 'ATMFADSL
Xconnects' table
The 'AutoPVC' table
13 Networking - ATM
150 / 288
3EC 36231 ABAA TCZZA Ed. 01
The following figure shows the 'ATMFADSL Xconnects' table:
This table, which is only present in case of a dual port STPro,
indicates all crossconnections between the DSL line and the
ATMF25.6 port.
The following figure shows an example of the 'AutoPVC' table:
Any PVC, identified by its VPI/VCI and communicated via AutoPVC
is added to the 'AutoPVC' table. If AutoPVC is not supported at the
remote side, i.e. the Digital Subscriber Line Access
Multiplexer (DSLAM), the 'AutoPVC' table stays empty.
See subsection 13.3.3 for more information.