User Guide

Introduction
In this section
12 Configuration and Use - CIP & IP Routing
121 / 288
3EC 36231 ABAA TCZZA Ed. 01
12.2 CIP Configuration for a LIS
This section describes the basic procedures to enable connectivity
in a Logical IP Subnet (LIS) via the ATM core network.
Topic See
General CIP Configuration Procedure 12.2.1
Retrieving LIS Parameters 12.2.2
Implicit Assignment Mechanism 12.2.3
Explicit Assignment Mechanism 12.2.4
Configuring the STPro for CIP 12.2.5
Adding Appropriate Routes to the Routing Tables. 12.2.6
Example of a CIP LIS Configuration 12.2.7