User Guide

Introduction
The 'Detailed
Configuration' page
Interaction with the
STPro IP router
In this section
11 Configuration and Use - Routed PPPoA
108 / 288
3EC 36231 ABAA TCZZA Ed. 01
11.4 Detailed Configuration
Additional configuration of the Routed PPPoA connection may be
needed in the 'Detailed Configuration' table.
This section describes the various PPPoA connection configurations
the STPro offers for assuring endtoend connectivity.
On the 'PPP' page a 'Detailed Configuration' table can be found.
The contents of this table are always related to the highlighted
PPPoA connection in the 'PPP Configuration' table.
The 'Detailed Configuration' table contains three or four tabs. The
first tab 'PPPoE' is not of importance for Routed PPPoA. The
second and third tab 'Routing' and 'Other' allow you to overview
or configure connection related settings for the Routed PPPoA
connection. The fourth tab 'Stats' appears only if a session is
running on the selected Routed PPPoA connection.
After configuration of these detailed Routed PPPoA entry aspects,
press
and to apply and save your changes.
Most of the configurations described in this section, influence the
IP router in the STPro.
See section 14.5 for more information on IP routing aspects.
Topic See
'Routing' Configurations 11.4.1
'Other' Configurations 11.4.2
'Stats' During a Routed PPPoA Session 11.4.3