User Guide

6 DHCP Commands
84 / 260
3EC 16982 AFAA TCZZA Ed. 01
dhcp server config
Set SpeedTouchPro with Firewall DHCP server configuration.
Execute dhcp server status to see the actual status and configuration.
SYNTAX:
dhcp server config [beginrange = <ipaddress>]
[endrange = <ipaddress>]
[netmask = <ipaddress>]
[leasetime = <number>]
[gateway = <ipaddress | 0>]
[dnsaddr = <ipaddress>]
beginrange The lowest IP address in the DHCP address range to use for leasing.
Default value of this parameter is 10.0.0.1.
OPTIONAL
endrange The highest IP address in the DHCP address range to use for leasing.
Default value of this parameter is 10.255.255.254.
OPTIONAL
netmask The applicable netmask for the DHCP leases. OPTIONAL
leasetime A number between 0 and 1814400 (seconds).
Represents the time for which a client can use its dynamically
allocated IP address.
By default the leasetime is 2 hours (7200 seconds).
Specifying -1 makes the lease permanent.
OPTIONAL
gateway The IP address of the gateway for DHCP clients. OPTIONAL
dnsaddr The IP address of the DNS server for DHCP clients.
Entering '0' sets the SpeedTouch Pro with Firewall as DNS
server.
OPTIONAL