User Guide

4 CIP Commands
52 / 260
3EC 16982 AFAA TCZZA Ed. 01
cip load
Load saved (or default) CIP configuration.
Execute cip flush prior to cip load.
SYNTAX:
cip load [defaults = <yes/no>]
[defaults] Load factory defaults (yes) or saved configuration (no).
Not specifying this parameter loads the saved configuration
OPTIONAL
EXAMPLE:
=>cip iflist
cip0 addr = 172.16.1.1 mask = 255.255.255.0
UNI address = A0:*.03
inarp_reqs_in = 0 inarp_repl_in = 0 inarp_inv_in = 0
inarp_reqs_out = 0 inarp_repl_out = 0 inarp_inv_out= 0
cip1 addr = 172.16.0.5 mask = 255.255.255.0
UNI address = A0:*.04
inarp_reqs_in = 0 inarp_repl_in = 0 inarp_inv_in = 0
inarp_reqs_out = 0 inarp_repl_out = 0 inarp_inv_out= 0
=>cip save
=>cip flush
=>cip iflist
=>cip load defaults=yes
=>cip iflist
cip0 addr = 172.16.1.1 mask = 255.255.255.0
UNI address = A0:*.03
inarp_reqs_in = 0 inarp_repl_in = 0 inarp_inv_in = 0
inarp_reqs_out = 0 inarp_repl_out = 0 inarp_inv_out= 0
=>cip flush
=>cip iflist
=>cip load defaults=no
=>cip iflist
cip0 addr = 172.16.1.1 mask = 255.255.255.0
UNI address = A0:*.03
inarp_reqs_in = 0 inarp_repl_in = 0 inarp_inv_in = 0
inarp_reqs_out = 0 inarp_repl_out = 0 inarp_inv_out= 0
cip1 addr = 172.16.0.5 mask = 255.255.255.0
UNI address = A0:*.04
inarp_reqs_in = 0 inarp_repl_in = 0 inarp_inv_in = 0
inarp_reqs_out = 0 inarp_repl_out = 0 inarp_inv_out= 0
=>
RELATED COMMANDS:
cip flush Flush complete CIP configuration.
cip save Save current CIP configuration.