User Guide

17 System Commands
248 / 260
3EC 16982 AFAA TCZZA Ed. 01
system load
Load saved (or default) system configuration.
Execute system flush prior to system load.
In most cases loading the default system configuration
causes the SpeedTouchPro with Firewall
system password to be CLEARED.
Therefore, to avoid unrestricted and unauthorized access to the SpeedTouchPro with Firewall it
is highly recommended always to make sure that it is protected by a SpeedTouchPro with
Firewall system password (by executing system setpassword) and to change the password
regularly.
SYNTAX:
system load [defaults = <yes|no>]
[defaults] Load factory defaults (yes) or saved configuration (no).
Not specifying this parameter loads the saved configuration
OPTIONAL
EXAMPLE:
=>system load defaults=no
=>
RELATED COMMANDS:
system flush Flush complete system configuration.
system save Save current system configuration.