User Guide

13 PPP Commands
224 / 260
3EC 16982 AFAA TCZZA Ed. 01
ppp save
Save current PPP configuration.
SYNTAX:
ppp save
EXAMPLE:
=>ppp iflist
PPP1: dest : PPP1
Retry : 10 QoS default encaps VC–MUX
mode = IP Routing
flags = echo magic accomp mru addr route savepwd PPPOA
trans addr = pat mru = 1500
route = 0.0.0.0/0 – 0.0.0.0/0 (metric 0)
user name = guest password= ********
admin state = down oper state= down link state = not–connected
LCP : state = initial retransm= 10 term. reason =
IPCP : state = initial retransm= 0 term. reason =
=>ppp save
=>ppp flush
=>ppp iflist
=>ppp load
=>ppp iflist
PPP1: dest : PPP1
Retry : 10 QoS default encaps VC–MUX
mode = IP Routing
flags = echo magic accomp mru addr route savepwd PPPOA
trans addr = pat mru = 1500
route = 0.0.0.0/0 – 0.0.0.0/0 (metric 0)
user name = guest password= ********
admin state = down oper state= down link state = not–connected
LCP : state = initial retransm= 10 term. reason =
IPCP : state = initial retransm= 0 term. reason =
=>
RELATED COMMANDS:
ppp flush Flush complete PPP configuration.
ppp load Load saved or default PPP configuration.