User Guide

13 PPP Commands
219 / 260
3EC 16982 AFAA TCZZA Ed. 01
ppp ifscan
Scan a PPPoE interface ( proto=pppoe) for available Access Concentrator names and Service
Names.
Execute the ppp ifdetach command for this interface prior to perform a scan on it.
SYNTAX:
ppp ifscan intf = <ifname>
[time = <number{0-36000}>]
[kit = <number{0-8}>]
intf The name of the PPP interface to scan. REQUIRED
[time] A number between 0 and 36000 (seconds).
Represents the time to scan for services.
OPTIONAL
[kit] A number between 0 and 8.
Represents the way the scan progress is visually indicated.
Per default no progress indicator is applied (kit=0).
kit=1 up to kit=8 are diverse progress indicators. Try it !
OPTIONAL
EXAMPLE:
=>ppp iflist
PPP1: dest : PPP1
Retry : 10 QoS default encaps LLC
mode = IP Routing
flags = echo magic accomp restart mru addr route savepwd PPPOE
trans addr = pat mru = 1492
route = 0.0.0.0/0 – 0.0.0.0/0 (metric 0)
user name = guest password= ********
admin state = down oper state= down link state = not–connected
LCP : state = initial retransm= 10 term. reason =
IPCP : state = initial retransm= 0 term. reason =
=>ppp ifscan intf=PPP1 time=45
Service Name Access Concentrator
Done !
=>
RELATED COMMANDS:
ppp ifconfig Configure a PPP interface.