User Guide

13 PPP Commands
214 / 260
3EC 16982 AFAA TCZZA Ed. 01
[retryinterval] A number between 0 and 65535 (seconds).
Represents the intermediate interval between two retries to establish
the connection on ATM level..
Only applicable in an SVC environment.
OPTIONAL
[passive] Put the link in listening state in case LCP times out (on) or not (off).
This parameter allows to determine whether the link should be left
open to wait for incoming messages from the remote side after 10
unsuccessful tries to establish the connection or not.
Per default the listening state is disabled.
OPTIONAL
[silent] Do not send anything at startup and just listen for incoming LCP
messages (on) or retry up to 10 times to establish the connection
(off).
Per default the silent state is disabled.
OPTIONAL
[echo] Send LCP echo requests at regular intervals (on) or not (off).
Per default the sending of LCP echo requests is enabled.
OPTIONAL
[mru] A number between 293 and 8192.
Represents the maximum packet size the SpeedTouch Pro with
Firewall should negotiate to be able to receive.
OPTIONAL
[laddr] The local IP address of the peertopeer connection.
Specifying a local IP address forces the remote side of the PPP link (if
it allows to) to accept this IP address as the SpeedTouchPro with
Firewall PPP session IP address.
If not specified, the SpeedTouchPro with Firewall will accept any
IP address.
Typically the local IP address parameter is not specified.
OPTIONAL
[raddr] The remote IP address of the peertopeer connection.
Specifying a remote IP address forces the remote side of the PPP link
(if it allows to) to accept this IP address as its PPP session IP address.
If not specified, the SpeedTouchPro with Firewall will accept any
IP address.
Typically the remote IP address parameter is not specified.
OPTIONAL
[savepwd] Save password (on), if supplied, or do not save the password (off).
Per default the saving of the password is disabled.
OPTIONAL
[demanddial] Enable (on) or disable (off) the dialondemand feature. OPTIONAL
[primdns] The IP address of the primary DNS server.
In case a primary DNS server is specified the SpeedTouchPro
with Firewall will negotiate this IP address with the remote side.
If not specified, the SpeedTouchPro with Firewall will accept any
IP address.
OPTIONAL
[secdns] The IP address of the (optional) secondary DNS server.
In case a secondary DNS server is specified the SpeedTouchPro
with Firewall will negotiate this IP address with the remote side.
If not specified, the SpeedTouchPro with Firewall will accept any
IP address.
OPTIONAL










