User Guide

13 PPP Commands
210 / 260
3EC 16982 AFAA TCZZA Ed. 01
EXAMPLE:
=>ppp iflist
PPP1: dest : PPP1
Retry : 10 QoS default encaps VC–MUX
mode = IP Routing
flags = echo magic accomp mru addr route savepwd PPPOA
trans addr = pat mru = 1500
route = 0.0.0.0/0 – 0.0.0.0/0 (metric 0)
user name = guest password= ********
admin state = down oper state= down link state = not–connected
LCP : state = initial retransm= 10 term. reason =
IPCP : state = initial retransm= 0 term. reason =
=>ppp ifadd intf=PPP2 dest=PVC2
=>ppp iflist
PPP1: dest : PPP1
Retry : 10 QoS default encaps VC–MUX
mode = IP Routing
flags = echo magic accomp mru addr route savepwd PPPOA
trans addr = pat mru = 1500
route = 0.0.0.0/0 – 0.0.0.0/0 (metric 0)
user name = guest password= ********
admin state = down oper state= down link state = not–connected
LCP : state = initial retransm= 10 term. reason =
IPCP : state = initial retransm= 0 term. reason =
PPP2: dest : PVC2
Retry : 10 QoS default encaps VC–MUX
mode = IP Routing
flags = echo magic accomp restart mru addr savepwd PPPOA
mru = 1500
user name = password=
admin state = down oper state= down link state = not–connected
LCP : state = initial retransm= 10 term. reason =
IPCP : state = initial retransm= 0 term. reason =
=>
RELATED COMMANDS:
ppp ifattach Attach a PPP interface.
ppp ifconfig Configure a PPP interface.
ppp ifdelete Delete a PPP interface.
ppp ifdetach Detach a PPP interface.
ppp iflist Show current PPP configuration.