User Guide
12 Phonebook Commands
198 / 260
3EC 16982 AFAA TCZZA Ed. 01
phonebook add
Add a phonebook entry.
The number of entries is limited to 64. The number of active connections is limited to 12, but more
may be configured at the same time.
SYNTAX:
phonebook add name = <string>
addr = <[port.]vpi.vci>
type = <{any|bridge|ppp|cip|ans|pptp}>
name A free to choose phonebook name for the destination.
Two limitations apply:
The name of a phonebook entry intended for the Relayed
PPPoA (PPPoAtoPPTP Relaying) packet service may not start
with capital P or capital T
The name of a phonebook entry intended for the PPPtoDHCP
spoofing packet service must start with DHCP, e.g.
`DHCP_Spoof01`.
REQUIRED
addr The ATM address for this destination.
It is composed of a Virtual Path Identifier (VPI) and a Virtual Channel
Identifier (VCI) identifying ATM virtual channels.
In most cases the values are provided by the Service Provider.
Accepted VPI: a number between 0 and 15
Accepted VCI: a number between 0 and 511.
REQUIRED
type The Connection Service supported by the destination.
Choose between:
any (All Packet Services)
bridge (Bridging, Routed Ethernet, Bridged PPPoE, Routed
PPPoE)
ppp (Routed PPPoA and Relayed PPPoA)
cip (Classical IP & IP Routing)
ans (ATM Name Service)
pptp (Relayed PPPoA, PPPoAtoPPTP Relaying).
REQUIRED