User Guide

11 NAT Commands
192 / 260
3EC 16982 AFAA TCZZA Ed. 01
nat list
Show NAPT connection database.
SYNTAX:
nat list [addr = <ipaddress>]
[addr] The SpeedTouchPro with Firewall IP address for which the NAPT
connection database must be shown.
In case the parameter is not specified the NAPT connection database
for all IP addresses is shown.
OPTIONAL
EXAMPLE INPUT/OUTPUT:
=>nat list
Indx Prot Inside–addr:PortOutside–addr:Port Foreign–addr:Port Flgs Expir State Control
1 6 10.0.0.138:80 172.16.0.5:1080 0.0.0.0:0 19 8 9
2 17 10.0.0.138:135 10.0.0.140:135 10.0.0.155:1034 11 20 10
3 17 10.0.0.138:138 10.0.0.140:138 10.0.0.20:138 11 20 10
4 17 10.0.0.138:137 10.0.0.140:137 10.0.0.254:137 11 20 10
5 17 10.0.0.138:7938 10.0.0.140:7938 10.0.0.96:4756 11 20 10
6 17 10.0.0.138:513 10.0.0.140:513 10.0.0.109:513 11 20 10
7 17 10.0.0.138:111 10.0.0.140:111 10.0.0.96:4756 11 20 10
=>
RELATED COMMANDS:
nat create Create a static NAPT entry.
nat delete Delete a static NAPT entry.
nat disable Disable NAPT on one of the SpeedTouchPro with Firewall IP
addresses.
nat enable Enable NAPT on one of the SpeedTouchPro with Firewall IP
addresses.