User Guide

11 NAT Commands
190 / 260
3EC 16982 AFAA TCZZA Ed. 01
nat enable
Enable NAPT on a SpeedTouchPro with Firewall IP address.
SYNTAX:
nat enable addr = <ip-address>
[type = <{none|pat}>]
addr The SpeedTouchPro with Firewall IP address on which NAPT
must be applied.
REQUIRED
[type] Enable port translation (pat) or not (none). OPTIONAL
EXAMPLE:
=>ip aplist
1 eth0 Type:EthernetHWaddr 00:80:9f:24:ab:cf BRHWaddr ff:ff:ff:ff:ff:ff
inet addr: 10.10.10.147 Bcast: 10.10.10.255 Mask: 255.0.0.0
UP RUNNING MTU:1500 ReasmMAX:65535 Group:2
IPRX bytes:19791886 unicastpkts:11341 brcastpkts:290555
IPTX bytes:839550 unicastpkts:11477 brcastpkts:0 droppkts:0
HWRX bytes:0 unicastpkts:0 brcastpkts:0
HWTX bytes:0 unicastpkts:0 brcastpkts:0 droppkts:0
0 loop Type:0
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP RUNNING MTU:1500 ReasmMAX:65535 Group:1
IPRX bytes:116 unicastpkts:0 brcastpkts:2
IPTX bytes:0 unicastpkts:0 brcastpkts:0 droppkts:0
HWRX bytes:0 unicastpkts:0 brcastpkts:0
HWTX bytes:0 unicastpkts:0 brcastpkts:0 droppkts:0
=>nat enable addr=10.10.10.147 type=pat
=>ip aplist
1 eth0 Type:EthernetHWaddr 00:80:9f:24:ab:cf BRHWaddr ff:ff:ff:ff:ff:ff
inet addr: 10.10.10.147 Bcast: 10.10.10.255 Mask: 255.0.0.0
UP RUNNING pat
MTU:1500 ReasmMAX:65535 Group:2
IPRX bytes:19791886 unicastpkts:11341 brcastpkts:290555
IPTX bytes:839550 unicastpkts:11477 brcastpkts:0 droppkts:0
HWRX bytes:0 unicastpkts:0 brcastpkts:0
HWTX bytes:0 unicastpkts:0 brcastpkts:0 droppkts:0
0 loop Type:0
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP RUNNING MTU:1500 ReasmMAX:65535 Group:1
IPRX bytes:116 unicastpkts:0 brcastpkts:2
IPTX bytes:0 unicastpkts:0 brcastpkts:0 droppkts:0
HWRX bytes:0 unicastpkts:0 brcastpkts:0
HWTX bytes:0 unicastpkts:0 brcastpkts:0 droppkts:0
=>
RELATED COMMANDS:
nat create Create a static NAPT entry.
nat delete Delete a static NAPT entry.
nat disable Disable NAPT on one of the SpeedTouchPro with Firewall IP
addresses.
nat list List NAPT connection database.