User Guide

252 Appendix A. Network Information Worksheets
Configuring a Dual-Ethernet Router for IP Routing
This table outlines commands used to configure a Dual-Ethernet router for IP Routing.
Dual-Ethernet Router - IP Routing
Steps Commands Your Settings
System Settings
System Name
system name
<name>
.............................................................
Message
system msg
<message>
.............................................................
Ethernet Settings
Routing/ Bridging
Controls
eth ip enable
eth br disable
.............................................................
ETH/0 IP Address
eth ip addr
<ipaddr> <ipnetmask>
[
<port#>
]
.............................................................
ETH/1 IP Address
eth ip addr
<ipaddr> <ipnetmask>
[
<port#>
]
.............................................................
TCP/IP default route
address
eth ip addroute
<ipaddr> <ipnetmask>
<gateway> <hops>
[
<port#>
]
.............................................................
DHCP Settings
Define DHCP
network for ETH/1
dhcp add
[<
net> <mask>
|
<ipaddr>
|
<code> <min> <max> <type>
.............................................................
Create an address
pool for ETH/1
dhcp set addresses
<first ipaddr> <last
ipaddr>
.............................................................
DNS Domain Name
dhcp set valueoption domainname
<
domainname
>
.............................................................
DNS Server
dhcp set valueoption domainnameserver
<ipaddr>
.............................................................
WINS Server
Address
dhcp set valueoption winsserver
<ipaddr>
.............................................................
Store
Reboot
save
reboot