User Guide

206 Chapter 5. Command Line Interface Reference
Save Configuration Commands (SAVE)
These commands save the entire router’s configuration or parts of it to FLASH memory. The parts that can be
saved include:
•System
• Ethernet LAN
• DHCP settings
• Remote router database settings
• Filters
SAVE ALL
Saves the configuration settings for the system, Ethernet LAN, DSL line, and remote router database into FLASH
memory. Note that there is a time lag between the response issued by a
save
command and the time the data is
actually stored in FLASH memory. Issue a
sync
command after a
save
command before powering off the router.
This commits the changes to FLASH memory.
SAVE ATM25
Saves the ATM configuration settings. All new entries and changed entries are erased from FLASH memory.
SAVE DHCP
Saves the DHCP configuration settings into FLASH memory.
save all
Example:
save all
save atm25
Example:
save atm25
save dhcp
Example:
save dhcp