User Guide

Chapter 5. Command Line Interface Reference 183
SDSL SAVE
Saves the SDSL-related changes across reboots.
SDSL TERMINAL
The router is by default configured as the Customer Premises End (CPE). Use this command if you intend to
configure the router as a Central Office equipment (CO).
sdsl terminal cpe
defines the CPE end (default configuration).
sdsl terminal co
defines the CO (central office) end.
sdsl terminal
displays the current settings.
SD STATS
Displays SDSL frame statistics.
FRAMER Statistics:
Framer Interrupts ......................26
Out of frame errors ....................0
HEC errors received ....................5
CRC errors received ....................21
FEBE errors received ...................0
Remote Out-of-frame ....................0
Remote HEC errors. .....................0
sdsl save
Example:
sdsl save
sdsl terminal
[cpe | co]
co This option lets you define the router as the central office
Example:
sdsl terminal
Response:
Customer Premises
Example:
sdsl terminal co
sd stats