User Guide

Chapter 5. Command Line Interface Reference 169
ATM SAVE
Saves the ATM configuration settings.
ATM SPEED
Sets the speed of the ATM link in kilobits per second. This command is similar to
atm pcr
(speed in cells per
second). Refer to the command
atm pcr
.
The upstream speed default is 326 Kb/s. Use this command if the upstream speed exceeds 326 Kb/s. The speed
value is generally obtained from your Network Service Provider.
ATOM DUMPUNKNOWNCELLS
Looks at the content of an ATM cell. It will not affect normal operation performance.
ATOM ECHOPVC
The echoPVC will echo back any ATM cell received on the PVC exactly as received. This is useful where some
administrative service wishes to ensure ATM connectivity but cannot use ATM OAM F5 cells to achieve this
function.
atm save
Example:
atm save
atm speed
[
upstream speed in Kb/S
]
upstream speed in Kb/S
Number provided by the Network Service Provider. The default value for the
upstream speed is 326 Kb/s.
Example:
atm speed 326
Response:
ATM Upstream Rate: 326 Kb/S
atom dumpunknowncells
[on|off]
Example:
atom dumpunknowncells on
atom echoPVC <
vpi number
> * <
vci number
>