User Guide

Chapter 5. Command Line Interface Reference 165
REMOTE STATS
Shows the current status of the connection to the remote router, including the bandwidth and data transfer rate.
REMOTE STATSCLEAR
Allows the user to reset the statistics counter for a given remote router.
remote stats
[<
remoteName
>]
remoteName
Name of the remote router (character string).
Example:
remote stats HQ
Response:
STATISTICS FOR <HQ>:
Current state .................... currently connected
Current output bandwidth .......... 0 bps
Current input bandwidth ........... 0 bps
Current bandwidth allocated ....... 25600000 bps
On port ATM_VC/1 .................. 0+01:02:36 (0%/0% of 25600000 bps)
Total connect time ................ 0+01:11:48
Total bytes out ................... 15896
Total bytes in .................... 0
STATISTICS FOR <internet>:
Current state ..................... not connected
Current output bandwidth .......... 0 bps
Current input bandwidth\ .......... 0 bps
Current bandwidth allocated ....... 0 bps
Total connect time ................ 0+00:00:00
Total bytes out ................... 0
Total bytes in .................... 0
where:
Current state: connected, not connected, currently connecting, currently attempting to connect, currently
closing, out of service, or not known.
Bandwidth state: idle, increasing, decreasing, decreasing hold, unknown, or idle.
remote statsclear
<
remoteName
>
remoteName
Name of the remote router (character string).
Example:
remote statsclear HQ