User Guide

Chapter 5. Command Line Interface Reference 151

REMOTE ENAAUTHEN

With this command the target router will try to negotiate authentication as defined in the remote router's database.

REMOTE ENABLE

Enables communications with the remote router. This command allows you to activate the entry in the remote

router database when you are ready.

REMOTE ENABRIDGE

Enables bridging from the target router to the remote router. This command requires rebooting the target system

for the change to take effect.

REMOTE IPFILTER

This command is used to define an IP filter on the WAN interface of the connection to establish a firewall. The

filter screens IP packets and operates at the interface level. Each interface is defined by three types of filters:

Input, Forward, and Output. For more information about IP filters, refer to the section

IP Filtering, on page 93

remote enaAuthen

remoteName

Name of the remote router (character string).

Example:

remote enaAuthen HQ

remote enable

remoteName

Name of the remote router (character string).

Example:

remote enable HQ

remote enaBridge

remoteName

Name of the remote router (character string).

Example:

remote enaBridge HQ

remote ipfilter

<command> <type> <action> <parameters> <remoteName