User Guide

150 Chapter 5. Command Line Interface Reference

REMOTE DISABLE

Disables communications with the remote router. This command allows you to enter routers into the remote router

database, but it sets them inactive.

Note:

The routing information defined for <

routerName

> is still in effect when the entry is disabled until you save

and reboot. However, no calls will be made to that remote router.

REMOTE DISAUTHEN

This command is intended for situations where third-party routers cannot be authenticate;: the target router will

not attempt to authenticate the remote router.

REMOTE DISBRIDGE

Disables bridging from the target router to the remote router.

Note:

This command requires rebooting the target system for the change to take effect.

remoteName

Name of the remote router (character string).

Example:

remote delServer 192.168.1.5 tcp ftp router1

remote disable

remoteName

Name of the remote router (character string).

Example:

remote disable HQ

remote disAuthen

remoteName

Name of the remote router (character string).

Example:

remote disAuthen HQ

remote disBridge

remoteName

Name of the remote router (character string).

Example:

remote disBridge HQ