User Guide

Chapter 5. Command Line Interface Reference 141
ETH IPX DISABLE
Disables IPX routing across the Ethernet LAN. This acts as a master switch allowing you to disable IPX Routing
for testing or control purposes.
Note:
This command requires a reboot.
ETH IPX ENABLE
Enables IPX routing across the Ethernet LAN. This acts as a master switch that allows you to enable IPX routing.
Note:
This command requires a reboot.
ETH IPX FRAME
Sets the frame encapsulation method. The default is 802.2.
eth ipx disable
[
port#
]
port#
Port number of the Ethernet LAN. This number must be 0 or 1, or it may be omitted.
Example:
eth ipx disable
eth ipx enable
[
port#
]
port#
Port number of the Ethernet LAN. This number must be 0 or 1, or it may be omitted.
Example:
eth ipx enable
eth ipx frame
<
type
>
type
802.2 (DEC standard)
802.3 (Intel standard)
dix (Xerox/Ethernet II standard)
Example:
eth ipx frame 802.3