User Guide

Chapter 5. Command Line Interface Reference 115
IPXSAPS
Lists the current services in the IPX SAPs table.
LOGIN
Login is required whenever you intend to change one or more configuration settings or save an entirely new
configuration.
After successfully logging in, the
#
is used as the prompt character to indicate that you are logged in as an
administrator.
LOGOUT
Logs out to reinstate administrative security after you have completed changing the router’s configuration.
Network Gateway Interface Hops Ticks Flags
00001001: HQ [down] 1 4 STATIC FORWARD DOD
00000456: (DIRECT) ETHERNET/0 0 1 FORWARD
where:
STATIC Static route
DOD Initiate link dial-up
FORWARD
DIRECT
ipxsaps
Response:
# ipxsaps
Service Name Type Node number Network Skt Hops
SERV312_FP 4 000000000001:00001001:045 1
login
<
password
>
password
Mandatory password set using the
system admin
command or default (
admin
). If not
specified, you will be shown the command syntax. The password is case sensitive.
Response:
“ Logged in successfully!” or “
Wrong password! Try logging in again.”
logout