User Guide

1 SpeedTouch™610 Installation
E-SIT-CTC-20030306-0004 v2.0
7
DSL variants Four DSL variants of the SpeedTouch™610 Business DSL routers exist:
• The SpeedTouch™610:
The ADSL/POTS variant connecting to an analog POTS(*) line.
• The SpeedTouch™610i:
The ADSL/ISDN variant connecting to a digital ISDN(**) line.
• The SpeedTouch™610s:
The SHDSL variant connecting to a dedicated SHDSL(***) line.
• The SpeedTouch™610v:
The SHDSL variant connecting to a dedicated VDSL(****) line.
Use only the SpeedTouch™610 variant which is appropriate for the DSL service deliv-
ered to your local premises.
Check at your Service Provider whether your SpeedTouch™610 variant meets the DSL
service requirements.
(*) Plain Old Telephone Service (POTS)
(**) Integrated Services Digital Network (ISDN)
(***) Symmetrical High speed Digital Subscriber Line (SHDSL)
(***) Very high speed Digital Subscriber Line (VDSL)
DSL Port
DSL service The appropriate DSL service must be available at your local premises:
• ADSL, SHDSL or VDSL service must be enabled on your phone line
• In case of ADSL, both POTS or ISDN and ADSL service are simultaneously avail-
able from the same copper pair. Therefore, you need a central splitter or distrib-
uted filters for decoupling ADSL and telephone signals
Always contact your Service Provider for splitter/filter installation!
Public telephone lines carry voltages that can cause electric shock. Only install splitter/
filters yourself if these are qualified for that purpose. Other splitter/filters may only be
installed by qualified service personnel.
Service Port pinning
ADSL 3/4
2-wire SHDSL 3/4
VDSL 3/4
4-wire SHDSL 3/4
2/5