User Guide

73 74
To activate notification when a new network is detected
When Wi-Fi is on and the network notification is activated, the Wi-Fi icon
will appear on the status bar whenever the phone detects an available
wireless network within range. The following steps activate the notification
function when Wi-Fi is on:
•Drag down notification panel and touch to access Settings.
•Touch Wi-Fi. Then touch the Menu key and select Advanced from
Wi-Fi screen.
•Mark/Unmark the Network notification checkbox to activate/
deactivate this function.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according to your
preference.
•Drag down notification panel and touch to access Settings.
•Touch Wi-Fi, and then touch .
•Enter the name of the network and any required network information.
•Touch Save.
When successfully connected, your phone will be connected automatically
the next time you are within range of this network.
To forget a Wi-Fi network
The following steps prevent automatic connections to networks which you
no longer wish to use.
•Turn on Wi-Fi, if it’s not already on.
•In the Wi-Fi screen, touch & hold the name of the saved network.
•Touch Forget network in the dialog that opens.
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service.
•Drag down notification panel and touch to access Settings.
•Touch SIM management\Roaming\Data roaming.
•Touch to select from popup options: Disable, National Roaming only
and All Networks.
•When Data roaming is deactivated, you can still perform data exchange
with a Wi-Fi connection (refer to "6.1.2 Wi-Fi").
6.1.2 Wi-Fi
Using Wi-Fi, you can connect to the Internet when your phone is within
range of a wireless network. Wi-Fi can be used on your phone even
without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
•Touch on quick setting panel to get to Settings.
•Touch the switch beside Wi-Fi to turn on/off Wi-Fi.
•Touch Wi-Fi, the detailed information of detected Wi-Fi networks is
displayed in the Wi-Fi networks section.
• Touch a Wi-Fi network to connect with. If the network you selected is
secured, you are required to enter a password or other credentials (you
may contact your network operator for details). When finished, touch
Connect.