User Guide

Menu
21-UK
- All calls
!!
!!
%
To deactivate all filtering of incoming and
outgoing calls.
- Password (Authorize)
!!
!!
&
To activate, deactivate or change the
password which protects access to the
"Authorize" function.
Networks
!!
!!
This service allows you to select the network
and the telephone connecting mode.
- Cell Broadcast
10
!!
!!
"
To receive special messages from a network
you are not connected to, you must first
create a list of codes corresponding to the
information you wish to receive (tariffs,
weather, etc) and select a reception mode.
· Reception mode
!!
!!
(Restricted, Full reception, No reception)
· CB code !!
!!
Display list !!
!!
Add CB code !!
!!
Dial the service call that was given to you
by your operator
!
Suppress CB !!
!!
and cancel message display, select the code
you wish to suppress
!
10 Functions displayed if available.
These messages are automatically displayed
upon receipt in the standby screen.
Use the
navigation key to display
information page by page.
- Selection
!!
!!
$
· Selection mode !!
!!
Automatic !!
!!
The telephone will always try to connect
first to your subscribed network. If it does
not find this, it will search for other GSM
networks (depending on the networks
available from the preferred list of
known networks, and subject to
agreements between operators).
Manual
!!
!!
In manual mode, you must select an
available network.
Forced
!!
!!
The forced mode forces a network search
from among the following:
Available net.: those of your radio
environment.
Known networks: You can select a
network from the list.
Type Ntwk code: you can enter the
network using a 5 figure code
11
(the three
country code figures followed by two
network code figures).
11 See the List of Networks supplied by your operator.