Presentation of the telephone Retractable antenna Earpiece Volume control LED indicator + Mute/vibrator key Short press: secret mode Long press: activate/ deactivate vibrator Display screen Navigation key 3 soft keys linked to the screen icons Home key ON/OFF (long press) Alphanumeric keypad Microphone The home key allows you to return to the standby screen at any time. A long keypress on the Home key activates the keypad lock. To deactivate the lock, type 159.
Contents SAFETY PRECAUTIONS AND CONDITIONS OF USE ............................ Conditions of use...................................... Safety lock ............................................... Environment ............................................ Safety precautions related to vehicle use ............................................... CALCULATOR ......................................... 17 2 2 2 2 2 INSTALLATION........................................ Inserting the SIM card ..........................
Safety precautions and conditions of use We recommend that you read this chapter carefully before use. As with all types of radio transceivers, your mobile phone emits electromagnetic waves. This telephone conforms to international regulations insofar as it is used under normal conditions and in accordance with the following. The manufacturer disclaims any liability for damage which may result as a consequence of improper use or use contrary to the instructions contained herein.
Installation INSERTING THE SIM CARD Open Unlock and lift the flap Close Insert the card into the flap Close and lock the flap IMPORTANT: To remove SIM card: 1. switch the telphone off, 2. remove the battery. Keep your SIM card in a safe place when not using your telephone and do not leave your confidential code (PIN) near the unit.
Installation CHARGING THE BATTERY Charging in progress Charging is possible with the telephone ON or OFF. Charging time is approximately 3 hours1. If your telephone has not been used for some time, be sure to recharge the battery before use. The socket outlet must be nearby and easily accessible. If you are using a new (or very discharged) battery, the battery charging icon may take a few minutes to appear. Avoid leaving your telephone without a battery connected to it.
Installation USING DRY CELLS (optional with specific compartment) Fitting the dry cells Remove the dry cells compartment Turn it over and insert the dry cells (LR3 or AAA type) Dry cells polarity is marked on the compartment bottom LED INDICATOR Green slow blinking: - Network presence: You can make and receive calls. Green rapid blinking: - Receiving a call - Receiving a message: may be interrupted by pressing or by receiving a call.
Calls So as to improve communication quality, it is recommended that the antenna should be fully extended.
Calls RECEIVING A CALL When a call is being received, the phone rings and the green LED indicator flashes rapidly.
Calls FUNCTIONS AVAILABLE WHEN IN COMMUNICATION Adjusting earpiece volume Use the side + and — volume adjustment controls. ! Access to directories ! Access to Short Message Service Scratchpad memory If you are in communication, someone may give you a number you wish to save. Enter this number and save it in the directory of your choice.
Calls HANDLING TWO CALLS SIMULTANEOUSLY3 Your telephone can simultaneously handle two calls: you can put one correspondent on hold to answer or make a second call and then switch between correspondents.
Call forwarding key The call forwarding key allows you, by simply pressing a button, to activate or deactivate the type of call forwarding you have programmed with . For example, you may activate an all calls forwarding to your secretary's number when you are at a meeting. TO ACTIVATE Access the second string of icons with the Press the Call forwarding key navigation key. Dial the number to which forwarding is required, and confirm Reconfirm Call forward.no.
Directories Three directories are available for storing telephone numbers: - the SIM card directory - two directories in the phone The telephone contains two directories with space for 50 memory locations each, it can also handle up to 250 more memory locations on the SIM card (depending on type of card). Each directory consists of memory locations so that you can store your correspondent's telephone number, name, address (directories 1 and 2) and memory location number (for rapid access).
Directories Enter the name and Proceed with to enter the address Type in the address and Proceed with to enter the memory location number An available memory location number is offered to you automatically. Name? Address ? Memory location? Confirm the storing of the memory location in directory 1. 6 85 2 13 75 1 2 Proceed press You can add a DTMF sequence to the phone number (sequence of digits added to the phone number so that the consultation of an answering machine or a voice mail, etc.
Directories SEARCHING A MEMORY LOCATION In the directory you can search for a name by entering the first letter: You are looking for Martin press for the letter M Find a memory location from a memory location number From the standby screen, key in the memory location number: Enter LOCATION No. Press MANAGING THE MEMORY LOCATIONS Access the SIM directory Access a memory location You now can: Delete Modify Call Ring tone Access Menu Ring tone to adjust the volume and melodies. Ring options 1. Volume 2.
Appointment Access the Appointment Enter date, time and subject. Validate after each entry To edit, modify or cancel an appointment. Alarm: Date Appointment fixed on the: 250698 12:20 Appointment! Cancel Modify If you do not wish to cancel nor modify the appointment, go back to the standby screen via . Voice mail This is for voice mail systems provided by networks4. They work similar to answering machines and can be checked at any time. This means that you do not miss any calls.
Short Message Service The operator's5 Short Message Service allows you to receive full text messages of up to 160 characters. You can also send short messages to another GSM5 telephone, or to a FAX5 machine, or to other dedicated servers. READING RECEIVED MESSAGES You have just received a message You are notified by a beep, a green flashing LED, and the Access the second string of icons with the Access the list of received messages icon on the screen. navigation key.
Short Message Service SENDING MESSAGES Access the second string of icons with the Access message system navigation key. You are in the list of received messages. Access the list of sent messages: You are in the list of sent messages. Create a new message: List of incoming messages is empty. List of outgoing messages is empty. Enter the message and confirm it Hello Entering parameters 1 Rcpt. 2 S.CTR. 3 Type of message GSM by default, or FAX, or other dedicated servers 4 Dura.
Calculator CALCULATOR The telephone will allow you to perform the four basic operations: +, -, ÷, x which are accessed from the navigation key; the decimal point can be accessed with the key and the result = is accessed with the key. ! Clearing the previous calculation To exit the calculator function, press the key. Menu Access the second string of icons with the navigation key. Access the menu Navigate between the menu lists Menu 1. Services 2. Cost 3.
Menu Menus Direct access keys and options Services Call forward. Call forw. key Call barring Autorize Networks Conceal ID. Caller ID? Call waiting Cost Cumulated cost Reset to 0 Last call Display credit Set credit Durat.reminder Cost reminder Unit& currency To personalize Personal Info.
Menu Crossed out functions require a special subscription. SERVICES - Cancel (one call forwarding) This option allows you to access the different services offered by the network. - Cancel all (all forwarding types) Call forward. ! Call forwarding is a service enabling you to redirect calls to another number, for example to your voice mail (this service can only be accessed within the GSM coverage zone). When one or more call forwarding options are active the status icon is displayed.
Menu Call barring7 & ! You can prevent the making or receipt of certain calls. This service is password protected. The icon shows the barring status. However, emergency calls are never barred. N.B.: If you have changed the programming of call barring on your SIM card from another phone, we advise you to interrogate your network. " ! - Activate (call barring) The types of call barring you can activate are the following: · Inc.
Menu % ! - All calls To deactivate all filtering of incoming and outgoing calls. ! - Password (Authorize) To activate, deactivate or change the password which protects access to the "Authorize" function. Networks & · Selection mode ! " ! - Cell Broadcast10 To receive special messages from a network you are not connected to, you must first create a list of codes corresponding to the information you wish to receive (tariffs, weather, etc) and select a reception mode.
Menu Note: If you have selected the forced mode, the name of the network will appear highlighted on the standby screen. ! · Preferred (List) This is a list of networks (maximum 32) which you can compile from the available and/or known networks, or 5 figure network codes that you enter manually. ! Add to the list ! · Forbbiden A network with a sign is forbidden by your subscribed network. This option allows to cancel a forbidden network * Cancel Conceal ID.
Menu Cost reminder15 ! You can programme a periodic beep to help you estimate the cost of your calls. Enter the number of charge units (up to 99). When the number is reached, a beep sounds during the call. Unit& currency16 ! You can set the telephone unit cost on your network in the currency of your choice including the currency name (as a default, enter "1", and communication cost will be calculated in units). TO PERSONALIZE This option allows you to enter some parameters to suit yourself (e.g.
Menu Time and Date ! The telephone displays the date and time on the standby screen. - Display format !" !# Language ! - To set A list of languages is offered. The "automatic" choice will be the language of your subscription network. Auto power off ! VEHICLE OPTION This option allows you to select user options for the telephone when connected to a vehicle hands-free kit. Any key answer ! This function allows you to answer a call by pressing any key.
Menu SECURITY Menu lock code This option protects use of the telephone's SIM card and bars access to certain functions. This protects access to certain "personal" telephone functions.
Menu $ ! - Fixed dir. Enables calls to be restricted to certain numbers or prefixes as entered in a directory called Fixed directory. This directory, if available, is in your SIM card. You can add prefixes at the time you make a call (to limit calls to a specific geographical area, or to a company, etc.). However, emergency calls are always enabled. ! · Activ/deactiv Only numbers in the fixed directory can be called, all other outgoing calls are barred. · To programme See "Creating a memory location".
Accessories BATTERY AND CHARGER The telephone is supplied with a charger and an uncharged Lithium (Li-Ion) battery. A range of optional accessories complements the standard pack (see "Accessories" leaflet). Conditions of use: Temperature: good between 0° and 40°. Network: depending on network coverage and parameters. Your movements: the battery will discharge noticeably when you are travelling at speed (e.g. car or train), as your telephone will be constantly interacting with the network.
List of icons Status icons Navigation icon associated with the corresponding navigation key Dialogue icon accessible via the corresponding key STATUS ICONS NAVIGATION ICONS Battery charge. To move up. Radio signal strength indicator To move down. (4 levels). Move to the right or to the following display. Short message received. Move to the left or to the previous display screen. Voice mail message received. Short message store full. Unanswered call received.
List of icons DIALOGUE ICONS (continued) Directory Answer an incoming call by ending the ongoing conversation. Access to the directories. Select directory n°1. Answer an incoming call by putting the ongoing call on hold. Select directory n°2. Select the SIM card directory. Switch from one correspondent to another. Select fixed directory. Mute the ring tone of incoming calls without answering or refusing a call. Create a new memory location in a Choice of ringing volume and melody.
What to do in case of problems Check that you have entered the correct code (a PIN code comprises 4 to 8 digits). After three unsuccessful attempts, your SIM card will be locked. TO UNLOCK PIN/PIN2 CODE: PUK1/PUK2 CODE - If the SIM card is blocked, press the PUK icon then enter your PUK1 code (8 digits) given by the dealer. - If access to protected functions is prevented, enter your unlocking PUK2 code digits) that was given to you at the time of subscription.
