User Guide

Alcatel PIMphony
5
Installing Alcatel PIMphony standard version
The Alcatel PIMphony application standard version is supplied in a pack containing:
• A CD-ROM containing the software to be installed.
• A PC-Telephone connection module CTI (Alcatel 4091 CTI).
• A V24 serial connection cable.
• A product installation manual.
Telephone configuration required
1. You must be connected to an Alcatel Office PABX, running software release R3.1 or later.
2. You must have an Alcatel Reflexes telephone.
PC configuration required
1. Before attempting to install the application, check that your PC configuration corresponds to
the minimum required configuration.
The application is installed in two phases, in the sequence shown below:
• Hardware installation
• Software installation
PC configuration required for standard
version
Hardware configuration
Your PC must have the following minimum characteristics:
• Processor: Pentium 166 MHz or better.
• RAM: minimum 48 MB.
• Hard disk: 30 MB available.
• CD-ROM drive.
• 1 RS232 serial port available (COM1 or COM2).