Datasheet

Alcatel-Lucent Page 62
OmniSwitch 9000
OS9-XNI-U2 Module
(2 x 10-Gigabit Ethernet XFP NI module)
OS9-XNI-U2: 2 x XFP 10-GigEth ports
Each 10 GigEth port supports industry standard XFP based 10GigE SMF 10GBASE-LR, MMF
10GBASE-SR, SMF 10GBASE-ER, and SMF 10BASE-ZR optical transceivers.
The applicable models provide 2 XFP slots. These slots support the following XFP types:
 XFP-10G-ER40—10GBASE-ER Single mode fiber, supports distances up to 40km;
uses LC connectors.
 XFP-10G-LR—10GBASE-LR Single mode fiber, supports distances up to 10km;
uses LC connectors.
 XFP-10G-SR—10GBASE-SR Multimode fiber, supports distances up to 300m;
uses LC connectors.
 XFP-10G-ZR80—10GBASE-ZR Single mode fiber, supports distances up to 80km;
uses LC connectors.
The two-port XFP 10 Gigabit slots can mix and match different 10-Gigabit XFP transceiver types.
Note. Compatibility with the OmniSwitch 6800 & OmniSwitch 6850 10-Gigabit Ethernet is supported.
OS9-XNI-U2 LEDs Module
(2 x 10-Gigabit Ethernet XFP NI module)
OK1: Hardware Status. Displays solid green when powered on and the GNI has passed hardware
diagnostic tests. Displays solid amber when powered on and the GNI has failed diagnostic testes.
OK2: Software Status. Blinks green when the GNI is operational and has successfully loaded software.
Displays solid amber when powered on and the GNI has failed to load the software.
LINK/ACT LED
Each 10-Gigabit port has a single LED for monitoring XFP link status and activity. The LED displays
solid green when the port is up; the LED blinks green when the port is transmitting or receiving
packets in a link up state. The LED is off when no link is detected.
OS9-XNI-U6 Module
(6 x 10-Gigabit Ethernet XFP NI module)
OS9-XNI-U6: 6 x XFP 10-GigEth ports
Each 10 GigEth port supports industry standard XFP based 10GigE SMF 10GBASE-LR, MMF
10GBASE-SR, SMF 10GBASE-ER, and SMF 10BASE-ZR optical transceivers.
The applicable models provide 2 XFP slots. These slots support the following XFP types:
 XFP-10G-ER40—10GBASE-ER Single mode fiber, supports distances up to 40km;
uses LC connectors.
 XFP-10G-LR—10GBASE-LR Single mode fiber, supports distances up to 10km;
uses LC connectors.
 XFP-10G-SR—10GBASE-SR Multimode fiber, supports distances up to 300m;
uses LC connectors.
 XFP-10G-ZR80—10GBASE-ZR Single mode fiber, supports distances up to 80km;
uses LC connectors.
The six-port XFP 10 Gigabit slots can mix and match different 10-Gigabit XFP transceiver types.
Note. Compatibility with the OmniSwitch 6800 & OmniSwitch 6850 10-Gigabit Ethernet is supported
OS9-XNI-U6 Module LEDs
(6 x 10-Gigabit Ethernet XFP NI module)
OK1: Hardware Status. Displays solid green when powered on and the GNI have passed hardware
diagnostic tests. Displays solid amber when powered on and the GNI have failed diagnostic testes.
OK2: Software Status. Blinks green when the GNI is operational and has successfully loaded software.
Displays solid amber when powered on and the GNI has failed to load the software.
LINK/ACT LED
Each 10-Gigabit port has a single LED for monitoring XFP link status and activity. The LED displays
solid green when the port is up; the LED blinks green when the port is transmitting or receiving
packets in a link up state. The LED is off when no link is detected.
Transceivers
10 Gigabit Ethernet Transceivers (XFP MSA)
10-Gigabit Ethernet XFP XFP 10-GigEth ports
Each 10 GigEth port supports industry standard XFP based 10GigE SMF 10GBASE-LR, MMF
10GBASE-SR, SMF 10GBASE-ER, and SMF 10BASE-ZR optical transceivers.
The applicable models provide 2 XFP slots. These slots support the following XFP types:
 XFP-10G-ER40—10GBASE-ER Single mode fiber, supports distances up to 40km;
uses LC connectors.
 XFP-10G-LR—10GBASE-LR Single mode fiber, supports distances up to 10km;
uses LC connectors.
 XFP-10G-SR—10GBASE-SR Multimode fiber, supports distances up to 300m;
uses LC connectors.
 XFP-10G-ZR80—10GBASE-ZR Single mode fiber, supports distances up to 80km;
uses LC connectors.
The XFP 10 Gigabit slots can mix and match different 10-Gigabit XFP transceiver types.
Note. Compatibility with the OmniSwitch 6800 & OmniSwitch 6850 10-Gigabit Ethernet is supported.
XFP-10G-ER40 10 Gigabit Ethernet optical transceiver (XFP MSA):
Supports single mode fiber over 1550nm wavelength (nominal) with an LC connector.
Typical reach of 40km on 9/125µm SMF.
XFP-10G-LR 10 Gigabit Ethernet optical transceiver (XFP MSA):
Supports single mode fiber over
1310nm wavelength (nominal) with an LC connector. Typical reach of 10km on 9/125µm SMF.
[Formerly known as 10G-XFP-LR]
XFP-10G-SR 10 Gigabit Ethernet optical transceiver (XFP MSA):