Datasheet
Alcatel-Lucent Page 57
OmniSwitch 9000
Input Current: 6.96 Amps AC @110VAC and 3.48 Amps AC @220VAC
Input electrical parameters for the following OmniSwitch 9600 configuration example:
(One OS9600 chassis + the fan-tray) + 1 x OS9600-CMM + 4 x OS9-GNI-U24;
Total System Power (“load”): 42watts + 1 x 27watts + 4 x 55watts = 289watts
Total AC input power required is: 385.33 watts (289 watts / 75% efficiency factor)
To meet the required power consumption for the above configuration, two 600 watts DC output power
supplies are recommended (one P/S is required based on the “load”) and since the power supplies
Load-share, each one will provide 192.66 watts AC input for a total input power of 385.33 watts DC:
[289 watts DC output / 75 % efficiency factor].
Input Power: 385.33watts AC
Nominal Input Voltage: USA: 110VAC or Europe: 220VAC
Input Current: 3.5 Amps AC @110VAC and 1.75 Amps AC @220VAC
Chassis AC-to-DC Power Supply Output Parameters
OS9-PS-0600A
OS9-PS-0600A single AC-to-DC power supply rated or maximum output electrical parameters:
Output Power: 600 watts DC, Output Voltage: 24 Volts DC, Output Current: 25 Amps DC
Output electrical parameters for the following OmniSwitch-9800 configuration example:
Configuration Example#1:
(One OS9800 chassis + the fan-tray) + 2 x OS9800-CMM + 16 x OS9-GNI-U24;
Total System Power (“load”): 80watts + 2 x 40watts + 16 x 55watts = 1040watts
Output Power: 1040watts DC
Output Voltage: 24VDC
Output Current: 43.33 Amps DC
To meet the required power consumption for the above configuration, three 600 watts DC output
power supplies are recommended (two P/S is required based on the “load”). The Power Supplies load-
share, each one will provide 346.66 watts DC output.
Note: The 24VDC is broken down on a DC-to-DC converter (located on every module) to: 3.3VDC,
2.5VDC, and 1.8VDC required voltages
Configuration Example#2:
This configuration example includes a OS9800-CB-A chassis + x NIs (as described) +
A PoE Power Shelf (OS9-IP-SHELF) with a total of 3 x 600watts PoE P/S (OS9-IPS-0600A):
Step#1: Calculate the output parameters for the main chassis:
(OS9800-CB-A: One OS9800 chassis + the fan-tray) + 1 x OS9800-CMM + 6 x OS9-GNI-P24 +
1 x OS9-GNI-U24 + 2 x OS9-GNI-C24;
Total Sys Pwr (“load”): 80watts + 1 x 40watts + 6 x 54watts + 1 x 55watts + 2 x 51watts = 601watts
Output Power: 601watts DC
Output Voltage: 24VDC
Output Current: 25.04 Amps DC
Step#2: Calculate the output parameters for the 3 x 600watts PoE P/S (3 x OS9-IPS-0600A):
Per PoE P/S:
Output Power: 600 watts DC, Output Voltage: 24 Volts DC, Output Current: 25 Amps DC
Output electrical parameters for the following OmniSwitch-9700 configuration example:
(One OS9700 chassis + the fan-tray) + 2 x OS9700-CMM + 8 x OS9-GNI-U24;
Total System Power (“load”): 80watts + 2 x 27watts + 8 x 55watts = 574watts
Output Power: 574watts DC
Output Voltage: 24VDC
Output Current: 23.91 Amps DC
To meet the required power consumption for the above configuration, two 600 watts DC output power
supplies are recommended (one P/S is required based on the “load”). The Power Supplies load-share,
each one will provide 287.0 watts DC output.
Note: The 24VDC is broken down on a DC-to-DC converter (located on every module) to: 3.3VDC,
2.5VDC, and 1.8VDC required voltages
Output electrical parameters for the following OmniSwitch-9600 configuration example:
(One OS9600 chassis + the fan-tray) + 1 x OS9600-CMM + 4 x OS9-GNI-U24;
Total System Power (“load”): 42watts + 1 x 27watts + 4 x 55watts = 289watts
Output Power: 289watts DC
Output Voltage: 24VDC
Output Current: 12.04 Amps DC
To meet the required power consumption for the above configuration, two 600 watts DC output power
supplies are recommended (one P/S is required based on the “load”). The Power Supplies load-share,
each one will provide 144.5 watts DC output.
Note: The 24VDC is broken down on a DC-to-DC converter (located on every module) to: 3.3VDC,
2.5VDC, and 1.8VDC required voltages