Datasheet

Alcatel-Lucent Page 52
OmniSwitch 9000
OmniSwitch-9700 Dimensions & Weights
Weight (fully loaded):
< 60kg or 133lbs
Dimensions:
17.400″ (W) x 19.250″ (H) x 17.312″ (D)
1
Backplane assembly: 14.675″ (W) x 15.022″ (H) x 0.25″ (thickness) & 7 lb or 3.17 kg
Power supply: 3.725″ (W) x 13.313″ (D) x 5.250″ (H) & 6 lb or 2.72 kg
Fan Tray: 6.250" (W) x 17.396" (L) x 2.562" (D) & 4.5 lb or 2.04 kg (including 3 fans)
Chassis assembly: 17.400″ (W) x 19.250″ (H) x 17.312″ (D)
1
& 55 lb or 24.94 kg
The OmniSwitch 9700 is 11 Rack Unit high.
NI Module assembly: 9.875″ (W) x 13.024″ (D) x 1.250″ (thickness) & 3 lb or 1.36 kg
Chassis Mgmt Module assembly: 13.083″ (W) x 13.024″ (D) x 1.420″ (thickness) & 6 lb or 2.72 kg
Total chassis weight fully populated per following configuration:
OS9700 Chassis including (one Chassis assembly + one Backplane assembly + one Fan-tray) + 3xP/S
2xChassis Mgmt Modules + 8xNIs (all supported NIs have the same approximate weight)
55 lb + 7 lb + 4.5 lb + 3x6 lb + 2x6 lb + 8x3 lb = 120.5 lb or 54.65 kg (± 5%)
The shipping weight will have to include the pallet assembly plus the carton & foams weights:
Pallet assembly (to be used for shipping weight calculations only): 12 lb or 5.44 kg
The carton & foams (to be used for shipping weight calculations only): approximately 10 lb or 4.53 kg
Fully loaded OS9700 Chassis per above configuration + Pallet assembly + the carton & foams
120.5 lb + 12 lb + 10 lb = 142.5 lb or 64.63 kg
A typical MiniGBIC (SX or LX or LH) weighs approximately 9.07 grams
Notes:
1
The OmniSwitch 9700 chassis must be installed with a mandatory fan-tray assembly
(OS9000-FTTC: one rear access fan-tray with three fans) for a proper switch functional
operation. Therefore, the chassis depth measurement as indicated above (17.312" (D)) includes
the fan tray’s (2.562" (D)) depth measurement.
1 kg = 2.2046 lbs
OmniSwitch-9600 Dimensions & Weights
Weight (fully loaded):
< 30kg or 66 lbs
Dimensions:
19.00″ (W) x 9.575″ (H) x 14.432″ (D)
Dimensions: 19.00″ (W) x 9.575″ (H) x 14.432″ (D)
The OmniSwitch 9600 is 5.47Rack Unit high.
Weight (fully loaded):
When fully populated (i.e., with CMM and all NI modules and power supplies installed), the
OmniSwitch 9600 weighs approximately 66 lbs (30 kg).
OmniSwitch-9700 & OmniSwitch-9800
Shipping Box Dimensions
OS9700 (Half Chassis): 24″ (W) x 31″ (H) x 24″ (D)
OS9800 (Full Chassis): 40″ (W) x 31″ (H) x 24″ (D)
Network Interfaces (NIs): 18″ (W) x 15″ (H) x 7″ (D)
OS9700-CMM: 20″ (W) x 20″ (H) x 7″ (D)
OS9800-CMM: 27″ (W) x 20″ (H) x 7″ (D)
Maximum Power Consumption per board OS9800-Chassis & Fans = 80W
OS9800-CMM = 40W
OS9700-Chassis & Fans = 80W
OS9700-CMM = 27W
OS9600-Chassis & Fans = 42W
OS9600-CMM = 27W
OS9-GNI-U24 = 55W (includes 24 SFP MiniGBIC Transceivers)
OS9-XNI-U2 = 36W
OS9-XNI-U6 = 67W
OS9-GNI-C24 = 51W
OS9-GNI-P24 = 54W
The 1000BASE-X SFP include: SFP-GIG-SX, SFP-GIG-LX, and SFP-GIG-LH70
SFP-GIG-SX transceiver = 0.75W
SFP-GIG-LX transceiver = 0.9W
SFP-GIG-LH70 transceiver = 1.0W
The OS9800 chassis backplane power consumption is: Negligible
The OS9700 chassis backplane power consumption is: Negligible
The OS9600 chassis backplane power consumption is: Negligible
The PoE IP Shelf (OS9-IP-SHELF) power consumption is: Negligible
The power consumption measurements were taken under fully loaded conditions.
All power consumption figures include a 10% safety margin.
Each main chassis AC-to-DC or DC-to-DC P/S outputs 600watts DC with an efficiency of ≥ 75%.
Each PoE IP Shelf AC-to-DC P/S outputs 600watts DC with an efficiency of ≥ 75%.