Datasheet

Alcatel-Lucent Page 50
OmniSwitch 9000
PoE AC-to-DC Power Supply
OmniSwitch 9000 Series of switches support an enclosed 600-Watt single output AC-to-DC power supply for worldwide
use as a maximum of up to N+1 power system configuration in support of PoE feature (IEEE 802.3af compliant). The
power supply is protected such that a short at the output to return will not result in a fire hazard, or shock hazard to the
power supply. The power supply will recover automatically. The power supply design enables the removal and
subsequent replacement of a defective power supply from an operating chassis, without affecting the operation of the
chassis itself. Neither switching off nor removing one supply nor installing and switching on another supply causes
voltage line on the backplane of the chassis to vary beyond the regulation limits. This assumes that the system is
configured for N+1 redundant operation. Hot swappable feature is supported.
“AC-to-DC” Power Supply: OS9-IPS-600A
MTBF BTU/hr.
When the P/S is
100% loaded @
600 watts DC
Temperature Relative Humidity Altitude
Operating
188,000 hours 2,047.28 BTU/hr. Operating:
0 to +70
o
C
Non-Operating:
– 40 to +85
o
C
Operating: 5% to 90%
non-condensing,
Storage: 0% to 95%
non-condensing
10,000 feet
@ +32
o
C
Rated
Input Power
Rated
Input Voltage
Rated
Input Current
Rated
Input Current
Rated
Input Frequency
Efficiency
800 Watts AC 85 to 270 VAC or
Agency approved:
100 to 250VAC
8.0 Amps AC
@ 100VAC
3.5 Amps AC
@ 230VAC
47 to 63 Hz
±3%
75 %
@ 115VAC
+25
o
C
Rated
Output Power
Rated
Output Voltage
Rated
Output Current
624 Watts DC 52 VDC 12 Amps DC
Maximum
Output Power
Maximum
Output Voltage
Maximum
Output Current
600 Watts DC 52 VDC 11.5 Amps DC