Datasheet

Alcatel-Lucent Page 40
OmniSwitch 9000
XFP-10G Specifications
XFP-10G-LR Technical Specifications
Features ■ Compact form factor according to 10 Gigabit Small Form Factor
Pluggable (XFP) Multi Source Agreement, Release 3.1
■ Multiple rate and multiple protocol support
—SMF: 10GE / 10GFC / SONET / SDH
—MMF: 10GE / 10GFC
■ XFP MSA compliant management and diagnostic interface
■ Z-Axis hot-plug capability
■ XFI serial data Interface via 30-Pin, XFP connector
■ Support link spans up to 10km with single mode fiber and 300m
with multimode fiber
■ IEEE 802.3ae 2002 compliant
—10GBASE-LR and 10GBASE-SR
■ 10GFC draft 3.0 compliant
—1200-SM-LL-L and 1200-MX-SN-I
■ OC-192 SR-1/STM I64.1
Standards Supported IEEE 802.3ae & 10GBASE-LR
Connector Type The transceiver support LC connectors and are hot swappable
Supports the ability to mix and match XFPs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Cable Supported Single mode; Full Duplex only
Source Type Supports 10µm & 1310nm with a serial transceiver
Cable Distances* ≈ up to 10km
Power Consumption ≈ 2.5watts
Operating Temperature -5 to 70°C
Transmitter Average Output (launch) optical power Min: -5.2dBm & Max: 0.5dBm
Receiver Sensitivity Min: -12.6dBm & Max: 0dBm
Power Budget** 7.4dBm (12.6 – 5.2 = 7.4dBm)
XFP-10G-SR Technical Specifications
Features ■ Compact form factor according to 10 Gigabit Small Form Factor
Pluggable (XFP) Multi Source Agreement, Release 3.1
■ Multiple rate and multiple protocol support
—SMF: 10GE / 10GFC / SONET / SDH
—MMF: 10GE / 10GFC
■ XFP MSA compliant management and diagnostic interface
■ Z-Axis hot-plug capability
■ XFI serial data Interface via 30-Pin, XFP connector
■ Support link spans up to 10km with single mode fiber and 300m
with multimode fiber
■ IEEE 802.3ae 2002 compliant
—10GBASE-LR and 10GBASE-SR
■ 10GFC draft 3.0 compliant
—1200-SM-LL-L and 1200-MX-SN-I
■ OC-192 SR-1/STM I64.1
Standards Supported IEEE 802.3ae & 10GBASE-SR
Connector Type The transceiver support LC connectors and are hot swappable
Supports the ability to mix and match XFPs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Cable Supported Multi mode; Full Duplex only
Source Type Supports 50/125µm & 62.5/125µm & 850nm with a serial transceiver
Cable Distances* ≈ up to 300m (based on 50/125µm MMF and a Modal bandwidth of
2000MHz*km)
Power Consumption ≈ 2.5watts
Operating Temperature -5 to 70°C
Transmitter Average Output (launch) optical power Min: -7.3dBm & Max: -1.0dBm
Receiver Sensitivity Min: 0dBm & Max: -11.1dBm
Power Budget** 3.8dBm (11.1 – 7.3 = 3.8dBm)