Datasheet

Alcatel-Lucent Page 29
OmniSwitch 9000
SFP-GIG-55CWD60 Technical Specifications
Features Eight (8) Wavelength CWDM Transceivers
Compliant with SFP MSA
Compatible with IEEE 802.3z Gigabit Ethernet 1000BASE-LX PMD Specifications
Compatible with 1.062GBd Fiber Channel 100-SM-LC-L FC-PI Standards
Minimum Optical Link Power Budgets of 22dB and 24dB to support 62km and 70km
Eye Safe (Class I Laser Safety per FDA/CDRH & Class 1M per IEC-825)
Duplex LC Optical Interface
Loss of Signal Output & TX Disable Input
Hot-pluggable
Single +3.3V Power Supply
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ yellow latch. Supports single mode fiber
over 1551nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.
Connector Type The transceiver support LC connectors and are hot swappable
Supports the ability to mix and match CWDMs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Standards supported IEEE 802.3z, and 1000BASE-LX
Connections supported 1000BASE-CWDM connections to backbone or server
Fiber optic cable supported Single mode (SMF) & 9/125µm
Wavelength 1551nm (nominal)
Transmitter Output Optical Power Min: -2 dBm and Max: +3 dBm
Input Optical Power Min: -24 and Max: -3 dBm
Power Budget* 22 dBm ( 24 – 2 = 22 dBm)
Cable distances** Long reach single mode (SMF) ≈ 62km
SFP-GIG-57CWD60 Technical Specifications
Features Eight (8) Wavelength CWDM Transceivers
Compliant with SFP MSA
Compatible with IEEE 802.3z Gigabit Ethernet 1000BASE-LX PMD Specifications
Compatible with 1.062GBd Fiber Channel 100-SM-LC-L FC-PI Standards
Minimum Optical Link Power Budgets of 22dB and 24dB to support 62km and 70km
Eye Safe (Class I Laser Safety per FDA/CDRH & Class 1M per IEC-825)
Duplex LC Optical Interface
Loss of Signal Output & TX Disable Input
Hot-pluggable
Single +3.3V Power Supply
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ orange latch. Supports single mode fiber
over 1571nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.
Connector Type The transceiver support LC connectors and are hot swappable
Supports the ability to mix and match CWDMs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Standards supported IEEE 802.3z, and 1000BASE-LX
Connections supported 1000BASE-CWDM connections to backbone or server
Fiber optic cable supported Single mode (SMF) & 9/125µm
Wavelength 1571nm (nominal)
Transmitter Output Optical Power Min: -2 dBm and Max: +3 dBm
Input Optical Power Min: -24 and Max: -3 dBm
Power Budget* 22 dBm ( 24 – 2 = 22 dBm)
Cable distances** Long reach single mode (SMF) ≈ 62km
SFP-GIG-59CWD60 Technical Specifications
Features Eight (8) Wavelength CWDM Transceivers
Compliant with SFP MSA
Compatible with IEEE 802.3z Gigabit Ethernet 1000BASE-LX PMD Specifications
Compatible with 1.062GBd Fiber Channel 100-SM-LC-L FC-PI Standards
Minimum Optical Link Power Budgets of 22dB and 24dB to support 62km and 70km
Eye Safe (Class I Laser Safety per FDA/CDRH & Class 1M per IEC-825)
Duplex LC Optical Interface
Loss of Signal Output & TX Disable Input
Hot-pluggable
Single +3.3V Power Supply
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ red latch. Supports single mode fiber over
1591nm wavelength (nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.
Connector Type The transceiver support LC connectors and are hot swappable
Supports the ability to mix and match CWDMs on the same unit