Datasheet

Alcatel-Lucent Page 25
OmniSwitch 9000
Compatible with SFP MSA
Compatible with SFF-8472
Compatible with IEEE 802.3z
Compatible with IEEE 802.3ah
Compatible with ANSI INCITS Fiber Channel FC-PI Rev13
Compatible with FCC 47 CFR Part 15, Class B
Compatible with FDA 21 CFR 1040.10 and 1040.11, Class I
RoHS compliant
Connections supported 1000BASE-LH40 connections to backbone or server
Fiber optic cable supported Single mode (SMF)
Wavelength 1310nm (typical)
Transmitter Average Output Optical Power Min: -2 dBm and Max: 3 dBm
Receiver Sensitivity Min: 0 dBm and Max: -22 dBm
Power Budget* 20 dBm ( 22 – 2 = 20 dBm)
Cable distances** Long reach SMF ≈ 40km
SFP-GIG-EXTND Technical Specifications
Overview The Fiber Driver® SFP Multimode Extender increases the reach of Gigabit Ethernet and Fiber
Channel data links to distances that far exceed the defined standard. This technology allows
multimode (MM) fiber previously used for FDDI, Fast Ethernet and other legacy protocols to now be
used for creating high-speed communication backbones.
Since first appearing in the Fiber Driver Gigabit Multimode Extender module, the performance and
reliability of the Multimode Extender (MMX) technology has been proven in installations throughout
the world. Typically, Gigabit Ethernet and Fiber Channel transmissions distances over MM fiber are
limited to 550 meters or less, far shorter than the 2-kilometer standard for when multimode fiber is
used to transmit FDDI or Fast Ethernet. This fact has left IT managers needing to implement
gigabit-speed protocols with little choice but to abandon their existing multimode fiber plant and
install new single mode fiber.
Features Extended 1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber
over 850nm wavelength (nominal) with an LC connector. Reach of up to 2 km (based on grade and
condition of fiber) on 62.5/125 µm MMF or 550m on 50.0/125 µm MMF.
Requires SFP-GIG-EXTND or GBIC-GIG-EXTND at the remote termination.
Supply Voltage: 3.3V
Transmits Gigabit Ethernet (IEEE 802.3) or Fiber Channel (ANSI X3.230-1994) up to 4 km (2 km
guaranteed. Maximum range depends upon grade and condition of fiber plant used) over 62.5µm and
50µm dual fiber multimode links
SFP MSA SFF-8074i compliant
Bellcore GR-468 compliant
Multimode DSC adapter
Plug-n-play, hot swappable functionality
Low EMI metal enclosure
Operating temperature: 0 to +70°C
Function SFP Extended Multimode 7 SFP Extended Multimode with ROHS Compliance
Connector Type LC
Standards supported IEEE 802.3z
Connections supported 1000BASE-SX connections to backbone or server
Fiber optic cable supported Multimode (MMF)
Wavelength 850nm (typical)
Transmitter Output Optical Power Min: N/A and Max: N/A
Receiver Sensitivity Min: N/A and Max: N/A
Power Budget* N/A
Cable distances** ≈ 2km on 62.5/125 µm MMF or 550m on 50.0/125 µm MMF
SFP-GIG-T Technical Specifications
Features • Up to 1.25Gb/s bi-directional data links
• Hot-pluggable SFP footprint
• Extended case temperature range (0°C to +85°C )
• Fully metallic enclosure for low EMI
• Low power dissipation (1.2 W typical)
• Compact RJ-45 connector assembly
• Access to physical layer IC via 2-wire serial bus
• 10/100/1000 BASE-T operation in host systems with SGMII interface
Connector Type RJ-45
Standards supported IEEE 802.3z, and 1000BASE-T
Connections supported 1000BASE-T connections to backbone or server
Copper Cables supported CAT5, CAT5e, and CAT6