Datasheet

Alcatel-Lucent Page 24
OmniSwitch 9000
Compatible with ANSI specifications for Fiber Channel
Compatible with FCC 47 CFR Part 15, Class B
Compatible with FDA 21 CFR 1040.10 and 1040.11, Class I
Compatible with Telcordia GR-468-CORE
RoHS compliance
Connections supported 1000BASE-LX connections to backbone or server
Fiber optic cable supported Single mode (SMF) with 9/125µm
Note: This transceiver also supports 50/125µm & 62.5/125µm Multimode (MMF) with a maximum
distance of up to 700m (typical 550m). This special mode of operation will require “single-mode
fiber offset-launch mode-conditioning patch cord” and be sure to review the IEEE 802.3 2002
clauses 38.11.1 through 38.11.4. The third party fiber optics distance extender devices will provide
the capabilities of supporting much further distances than the typical 550m.
Wavelength 1310nm (typical)
Transmitter Average Output Optical Power Min: -9.5 dBm and Max: -3 dBm
Receiver Sensitivity Min: 0 dBm and Max: -20 dBm
Power Budget* 10.5dBm (20 – 9.5 = 10.5 dBm)
Cable distances** ≈ 10km on SMF and ≈ 700m (typical 550m) on MMF
SFP-GIG-LH70 Technical Specifications
Features Up to 1.25Gbps bi-directional data links
80km transmission distance with SMF
1550nm DFB laser transmitter
SFP MSA package with LC optical receptacle
With lever latch for high density application
Single +3.3V power supply
Hot-pluggable capability
Low power dissipation
Very low EMI and excellent ESD protection
Class I laser product
Monitoring interface compliant with SFF-8472
Operation case temperature: 0 to +70°C
Connector Type The transceiver support LC connectors and are hot swappable
Supports the ability to mix and match SFPs on the same unit
Supports operation for layer-2, and layer-3 forwarding.
Standards supported IEEE 802.3z, 1000BASE-LH70
(The IEEE 802.3z standard describes the specifications for the 1000BASE-X fiber optic Gigabit Eth.)
Compliant with SFP MSA
Compliant with SFF 8472
Compliant with IEEE 802.3z
Compliant with ANSI INCITS Fiber Channel FC-PI Rev13
Compliant with FCC 47 CFR Part 15, Class B
Compliant with FDA 21 CFR 1040.10 and 1040.11, Class I
Connections supported 1000BASE-LH70 connections to backbone or server
Fiber optic cable supported Single mode (SMF) with 9/125µm
Wavelength 1550nm (typical)
Transmitter Output Optical Power Min: 0 dBm and Max: 5 dBm
Receiver Sensitivity Min: 0 dBm and Max: -22 dBm
Power Budget* 22 dBm (22 – 0 = 22 dBm)
Cable distances** Long reach SMF ≈ 70km
SFP-GIG-LH40 Technical Specifications
Features Dual data-rate of 1.25Gbps/1.0625Gbps
40km transmission distance with 9/125 µm SMF
1310nm uncooled DFB laser
PIN photodiode receiver
Class I laser product
Digital diagnostic monitor interface Compatible with SFF-8472
SFP MSA package with duplex LC receptacle
With lever latch for high density application
Very low EMI and excellent ESD protection
Single 3.3V power supply
Operating case temperature: 0 to +70°C
Connector Type The transceiver support LC connectors and are hot swappable
Supports the ability to mix and match SFPs on the same unit
Supports operation for layer-2, and layer-3 forwarding
Standards supported IEEE 802.3z, 1000BASE-LH40