Datasheet

Alcatel-Lucent Page 22
OmniSwitch 9000
OS9-GNI-U24 Technical Specifications Overview
OS9-GNI-U24 Technical Specifications Overview
Number of MiniGBIC ports
24 x 1000BASE- X Gigabit Ethernet SFP-MSA Hot Pluggable transceiver slots
Connector types
LC
Standards supported
IEEE 802.3z; 1000BASE-X
Data rate
1 Gigabit per second (full duplex)
Maximum frame size
9,216 bytes. OS9-GNI-U24 modules support jumbo frames (1,500 to 9,216 bytes)
MAC addresses supported
There are now two source learning modes available for the OmniSwitch 9000 Series switches: synchronized
and distributed. By default the switch runs in the synchronized mode, which allows a total MAC address tables
size of 16K per chassis. Enabling the distributed mode for the switch increases the table size to 16K per module
and up to 64K or more per OmniSwitch 9000 chassis. 4.1.10
The 6.1.3.R01 release provides support for this feature on the OmniSwitch 9000 Series.
Connections supported
1000BASE-X Gigabit Ethernet SFP-MSA Hot Pluggable transceiver connection supporting multiple uplinks
from wire closet switches and supporting a large number of Gigabit backbone links in core applications.
Power Consumption
55watts
Gigabit Ethernet Transceivers (SFP MSA)
SFP-GIG-47CWD60
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ gray latch. Supports single mode fiber over 1470 nm wavelength
(nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.
SFP-GIG-49CWD60
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ violet latch. Supports single mode fiber over 1490 nm wavelength
(nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.
SFP-GIG-51CWD60
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ blue latch. Supports single mode fiber over 1510 nm wavelength
(nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.
SFP-GIG-53CWD60
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ green latch. Supports single mode fiber over 1530 nm wavelength
(nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.
SFP-GIG-55CWD60
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ yellow latch. Supports single mode fiber over 1550 nm wavelength
(nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.
SFP-GIG-57CWD60
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ orange latch. Supports single mode fiber over 1570 nm wavelength
(nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.
SFP-GIG-59CWD60
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ red latch. Supports single mode fiber over 1590 nm wavelength
(nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.
SFP-GIG-61CWD60
CWDM Gigabit Ethernet optical transceiver (SFP MSA) w/ red latch. Supports single mode fiber over 1590 nm wavelength
(nominal) with an LC connector. Typical reach of 62 Km on 9/125 µm SMF.
SFP-GIG-EXTND
Extended 1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength
(nominal) with an LC connector. Reach of up to 2 km (based on grade and condition of fiber) on 62.5/125 µm MMF or 550m
on 62.5/125 µm MMF. Requires SFP-GIG-EXTND or GBIC-GIG-EXTND at the remote termination.
[Formerly known as GE-EXTND-SFP]
SFP-GIG-LH40
1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310 nm wavelength
(nominal) with an LC connector. Typical reach of 40Km on 9/125 µm SMF.
SFP-GIG-LH70
1000Base-LH Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1550nm wavelength (nominal)
with an LC connector. Typical reach of 70 Km on 9/125 µm SMF.
[Formerly known as MINIGBIC-LH-70]
SFP-GIG-LX
1000Base-LX Gigabit Ethernet optical transceiver (SFP MSA). Supports single mode fiber over 1310nm wavelength (nominal)
with an LC connector. Typical reach of 10Km on 9/125µm SMF. Typical reach of 550m on 50/125 & 62.5/125µm MMF.
[Formerly known as MINIGBIC-LX]
SFP-GIG-SX
1000Base-SX Gigabit Ethernet optical transceiver (SFP MSA). Supports multimode fiber over 850nm wavelength (nominal)
with an LC connector. Typical reach of 300m on 62.5/125 µm MMF or 550m on 50/125 µm MMF.
[Formerly known as MINIGBIC-SX]
SFP-GIG-T
1000Base-T Gigabit Ethernet Transceiver (SFP MSA) - Supports category 5, 5E, and 6 copper cabling up to 100m. SFP only
works in 1000 Mbps speed and full-duplex mode
Dual Speed Ethernet Transceivers (SFP MSA)
SFP-DUAL-MM
Dual Speed 100Base-FX or 1000Base-X Ethernet optical transceiver (SFP MSA).
Supports multimode fiber over 1310nm wavelength (nominal) with an LC connector.
Typical reach of 550m at Gigabit speed and 2km at 100Mbit speed.
Notes:
- At 100Mbit speed, this SFP can interoperate with SFP-100-LC-MM or similar transceiver on the other end,
- At Gigabit speed, this SFP cannot interoperate with SFP-GIG-SX or similar transceiver on the other end running over 850nm
wavelength.
- SFP supported on OS9-GNI-U24 Gigabit Ethernet Module and OS6850-U24X SFP ports (non combo)
SFP-DUAL-SM10
Dual Speed 100Base-FX or 1000Base-X Ethernet optical transceiver (SFP MSA).
Supports single mode fiber over 1310nm wavelength (nominal) with an LC connector.
Typical reach of 10km at Gigabit speed and 100Mbit speed.
Notes:
- At 100Mbit speed, this SFP can interoperate with SFP-100-LC-SM15 or similar transceiver,
- At Gigabit speed, this SFP can interoperate with SFP-GIG-LX or similar transceiver.
- SFP supported on OS9-GNI-U24 Gigabit Ethernet Module and OS6850-U24X SFP ports (non combo)