User guide

Standards Compliance Regulatory Compliance and Safety Information
page A-4 OmniSwitch 6900 Hardware Users Guide December 2013
Standards Compliance
The product bears the CE mark. In addition it is in compliance with the following other safety and EMC
standards:
All hardware switching modules used in an OmniSwitch 6900 switch comply with Class A standards.
Modules with copper connectors meet Class A requirements using unshielded (UTP) cables.
Safety Standards
• UL 60950-1, 2nd Edition
• CAN/CSA-C22.2 No. 60950-1-07, 2nd Edition
• EN 60950-1 with Amendment II
• IEC 60950-1 2nd Edition
• AS/NZS TS-001 and 60950: Australia
• UL-AR, Argentina
• TUV,UL-GS Mark, Germany
• NOM-019 SCFI, Mexico
• EN 60825-1 Laser
• EN 60825-2 Laser
• CDRH Laser
• CB Certification per IEC 60950-1, Second Edition)
EMC Standards
• FCC Part 15 (CFR 47) Class A
• ICES-003 Class A
• EN 55022: Class A
• CISPR 22 Class A
• AS/NZS 3548 Class A
• VCCI Class A; A1 and A2
• EN 55024: (Immunity)
• EN 61000-3-2
• EN 61000-3-3
• EN 61000-4-2
• EN 61000-4-3
• EN 61000-4-4
• EN 61000-4-5
• EN 61000-4-6
• EN 61000-4-8
• EN 61000-4-11