User guide

Monitoring Chassis Components Chassis and Power Supplies
page 2-38 OmniSwitch 6900 Hardware Users Guide December 2013
Monitoring Chassis Components
Viewing Chassis Slot Information
To view basic slot information, enter the show module command at the CLI prompt:
-> show module
To view more detailed information, use the show module long command:
-> show module long
Monitoring Chassis Temperature
The operating temperature of your switch is a critical factor in its overall operability. In order to avoid a
temperature-related system failure, your switch must always run at a temperature within the specified
operating temperature range. Refer to page 2-4 (OS6900-X20 and OS6900-X40) and page 2-8
(OS6900-T20 and OS6900-T40) for more information.
To avoid chassis over-temperature conditions, follow the important chassis airflow recommendations on
page 2-16.
To check the switch’s current temperature status, use the show fantray command. For example:
-> show temperature
For more information about this command, see the “Chassis Management and Monitoring Commands”
chapter in the OmniSwitch CLI Reference Guide.