User guide

Power Supplies Chassis and Power Supplies
page 2-28 OmniSwitch 6900 Hardware Users Guide December 2013
Power Supplies
OmniSwitch 6900 power supplies are located at the rear of the switch chassis. Refer to page 2-2 and
page 2-3 for more information on component location. Two slots are provided. If a second power supply is
installed, it will assume a standby role.
Please note that the OS6900 does not provide an on/off switch. Connecting an installed power supply to a
power source will boot the switch. Likewise, disconnecting all installed power supplies from a power
source will power off the switch.
AC Power Supply
AC Power Supply Front Panel
Model (OS-PS-450W-A) OS6900-BP-F (YM-2451C), Front-to-Rear
OS6900-BP-R (YM-2451F), Rear-to-Front (Purple Coloring)
Product Compatibility OmniSwitch 6900
Input Voltage Range 90-132VAC; 180-264VAC
Nominal Voltage 115 VAC; 230 VAC
Max. Power 450W
Input Current 8A (90-132V); 4A (180-264V)
Output Rating 2A min to 37A max @ +12V; 0A min to 3A max @ +5VSB
Ambient Temperature Non-Operating -40C to 70C
Humidity (Operating) 95%, non-condensing
Humidity (Non-Operating) 95%, non-condensing
Airflow This power supply is available in either a front-to-rear or rear-
to-front model. See the “Airflow Recommendations” on
page 2-16.
Status LED
AC Connector
Handle
Air Vent
Lock Tab